If your pond pump starts malfunctioning, this doesn’t necessarily mean you need to purchase a replacement. Some of the problems that occur have a quick fix, and you may be able to take care of them on your own.
What to do when your pond pump starts acting up:
- The first thing you want to do is clean it. If algae, dirt or debris has built up, it may be blocking the pump or otherwise preventing it from functioning properly. My last post was all about cleaning your pond pump, so refer to that for additional instructions.
- The next thing you want to look at is water level. If it’s not at the right level, it may be preventing your pump from functioning properly. Water levels that are too low can cause your pump to make weird noises, while those that are too high can cause overflowing. You want your pump to be submerged, but your pond does not need to be filled to the brim.
- Are you hearing a weird vibrating noise? If your pump is hitting up against the water basin, that could be the cause. Place a small rubber kitchen mat beneath your pump to take care of this minor problem.
- Finally, you always want to examine the tubing. If it is too small, place the connecting end in boiling water for a few minutes. Immediately after removing it, place it over the pond pump tube outlet. As it shrinks it will form a watertight seal. If it’s too small, purchase a corkscrew clamp to hold it in place. If neither of these solutions work, you can always buy new tubing. Although this is a slightly more expensive option, it is still more affordable than completely replacing the pump.
As you can see, many pond pump issues can be fixed without requiring you to invest much time or money. The biggest factor in keeping your pond fully functioning is to monitor its performance. As soon as you notice a problem, take the proper steps to identify it. If it’s a quick fix, follow our suggestions above. If you need assistance, contact one of our pond supplies experts for more information.